User Guide

Micro SD Memory Card for Data Storage
On the right-facing side of the G1W device, you will see a slot for the microSD card (not
included). Place the microSD memory card (up to 64GB), text facing upwards, into the slot
and push in until it clicks into place. To remove or replace the microSD memory card,
simply push in until it clicks in/out of place.
If the microSD card is unrecognized, a blue screen will appear with the message “PLEASE
INSERT SD CARD.” Plug the microSD into an adapter and into your computer via USB. Now
a pop-up window will appear and ask you to reformat your card. Please note that any data
stored on the microSD card will be deleted during the reformatting process. Click Yes and
allow the reformatting to begin. Once the reformatting is complete, detach card from
adapter and put back into the camera device. If no pop-up appears, as the microSD is
attached via USB, go to the Windows menu and select Computer. Right-click the removable
drive and select Format.
Place the microSD card back into the camera after reformatting and press the power button.
Attaching the Device to Tilting Suction Mount
On the top of the camera, you will see an open slot for the tilting suction mount at center.
Align the mount’s arm with the camera device’s open slot, pressing down and forward to
secure with mount.
Now you may remove the clear film on the suction and attach to the glass surface. To
remove the suction mount, pull the tag on the right-facing side of the suction and gently pull
off the glass surface to detach.