Pendant Stations Type BW, XACA, and SKYP Catalog 9001CT1001R07/13 2013 Class 9001 ™
Pendant Stations CONTENTS Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Type BW General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Specifications and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Type XACA General Information and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .7 Worksheet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pendant Stations Type BW Standard Duty Pendant Stations Type BW Standard Duty Pendant Stations All of the features of the Class 9001 Type BW pendant stations with external strain relief are now pre-assembled into one catalog number.
Pendant Stations Specifications Specifications The Class 9001 BW90 and BW100 pendant stations are used for hoist applications requiring either single-speed or two-speed buttons. These thermoplastic enclosures have a 1/2-inch conduit entrance at the top to accept a pendant cable. Internal and external strain relief comes standard. The stations are rated NEMA Type 1, 3, 3R, 4, and 4X. The enclosure is available in three colors. All universal stations have double circuit blocks (1 N.O.—1 N.C.
Pendant Stations Specifications Table 3: Electrical Contact Ratings, AC, Type BW AC—NEMA / UL B600 Inductive, 35% Power Factor Volts [1] 1 Make Resistive, 75% Power Factor Break Make, Break, and Continuous Carrying Amperes 5 A VA A VA Continuous Carrying Amperes 120 30.0 3600 3.0 360 5 240 15.0 3600 1.5 360 5 5 480 7.5 3600 0.75 360 5 5 600 0.6 3600 0.6 360 5 5 OSHA Regulation, Section 1910.
Pendant Stations Specifications Figure 2: Table 6: Contact Symbols Marking Each button has 1 N.O. contact with 4 terminals.
Pendant Stations Type XACA General Information Type XACA General Information XACA pendant stations are designed for standard- or medium-duty control circuit applications. The enclosures are made from rugged, double insulated thermoplastic material. These stations have been designed for easy handling and operation, even with heavy work gloves.
Pendant Stations Type XACA Specifications Table 14: XACA2013 Pistol Grip Stations Speeds 1 N.O. contact per operator 2 mechanically interlocked operators 1 XACA201 [1] 2 N.O. (staggered) contacts per operator 2 mechanically interlocked operators 2 XACA207 [1] 1 N.O. + 1 N.C. 2 mechanically interlocked operators 1 XACA205 [1] 1 N.O. contact per direction 1 mechanically interlocked 2 way toggle 1 XACD21A0101 1 N.O. & 1 N.C.
Pendant Stations Type XACA Specifications Table 18: Operators [1] Description Booted Push Button Booted push button Mushroom Head XACA9411 Black XACA9412 Green XACA9413 Red XACA9414 Yellow XACA9415 Blue XACA9416 Brown XACA9419 Mushroom Color Size Catalog Number Mushroom head, momentary 30 mm Red ZA2BC44 30 mm Red ZA2BS44 40 mm Red ZA2BS54 30 mm Red ZA2BS834 40 mm Red ZA2BS844 30 mm Red ZA2BS74 40 mm Red ZA2BS14 40 mm Red ZA2BS844 Mushroom head, push to maintain /
Pendant Stations Type XACA Specifications Figure 3: Exploded View XACA960 XACB961 XENT1192 XACA941● ZA2BC4 XENG1● 91 ZA2BC44 XENG37●1 XACA009 ZA2BS54 ZB2BE●●● ZA2BS44 ZA2BS14 ZB2BY●●●● XACS●●● ZB2BV00● ZA2BS74 ZB2BY●●●● ZA2BD● ZA2BG● XACA982 XACA971 ZA2BD ● ZA2BB ● ZA2BV0● XACA983 ZA2BG● ZA2BC●●BS●● ZB2SZ3 10 07/2013 ™ © 2013 Schneider Electric All Rights Reserved
Pendant Stations Type XACA Specifications Table 21: Lamps Type DL1CE0•• (Incandescent) Replacement Bulbs Type BA9s Incandescent Type DL1CJUS•••• (LED) LED, BA9s Base for Direct Supply Blocks Table 22: Text Voltage (AC/DC) Watts Catalog Number 6 1.2 DL1CB006 12 2.0 DL1CE012 24 2.0 DL1CE024 48 2.4 DL1CE048 130 2.
Pendant Stations Type XACA Worksheet Type XACA Worksheet Use this worksheet to assist in component selection. Custom orders for XACA pendant stations must be placed through the Product Selector in Quote to Cash. There is a 10% charge for assembly. XACA Order Guide Instructions 14 Custom built pendant stations 1. Determine the number of operators needed, then choose an enclosure with a corresponding number of holes. 2.
Pendant Stations Type XACA Dimensions Type XACA Dimensions Small Hoist Type XACA201, A205, and A207 General Purpose Type XACA•••• Internal dia. 8 to 10 mm Internal dia. 9 to 13 mm 11 to 14 mm 15 to 17 mm 18 to 22 mm 8.5 216 10.87 276 22 to 26 mm 1.9 48 A 1.66 42 1.8 30 1.97 50 B 2.36 60 Small Hoist XACD Internal dia. 7 to 9 mm 10 to 12 13 to 15 16 to 18 8 mm dia. 2.75 70 11.83 300.5 3.55 90 3.15 80 1.3 33 9.45 240 XAC A982 .35 8 1.1 28 3.15 80 XAC A983 2.25 57 3.23 .79 20 3.
Pendant Stations Type SKYP General Information Type SKYP General Information Lifetime Enclosure Warranty This line of pendant stations consists of polymeric enclosures (2–10 units), push button units (1–5 speed), and laminated legend plates. All enclosures have an extra single-unit space near the top that permits the installation of a toggle switch, a Type SK operator or pilot light, or a warning label (see Table 29 on page 15).
Pendant Stations Type SKYP Specifications Table 27: Hanger bracket (Catalog no. 65091-061-01) Threaded conduit hole Space for toggle switch, a Type SK operator, or a pilot light. Use appropriate legend plates. Type SKYP enclosure Type SKRU1 through SKRU11 operators. Any Type SK pilot light or operator can be mounted in this enclosure. The enclosure depth accommodates one Type KA1 through KA6 contact blocks (total of two).
Pendant Stations Type SKYP Specifications Table 30: Non-Illuminated and Illuminated Push Buttons Non-Illuminated Illuminated Description Color 1 Color Code Class 9001 Type Description Color Color Code Voltage Class 9001 Type 2 Position Red R SKR9R 2 Position Red R 120 Vac/Vdc SKR9P58R Full Voltage Maintained Pull Red [1] R SKR9R05 Maintained Pull Red [1] R 24 Vac/Vdc Full Voltage SKR9P55R05 Maintained Push Black Red Green Blue Yellow White Orange Clear Amber B R G L Y W S C A Ma
Pendant Stations Type SKYP Specifications Table 32: Standard Light Modules for Pilot Lights (continued) Light Module Voltage Description All Full Voltage (without Bayonet Base Lamp) Class 9001 Type Replacement Lamp Voltage Assembly Code Rating 40 — KM40 Catalog No. None 120 Vac/Vdc LED Yellow KM38LY 38LY 1.4 VA 6508805211 120 Vac/Vdc LED White KM38LW 38LW 1.4 VA 6508805214 120 Vac/Vdc LED Blue KM38LL 38LL 1.4 VA 6508805213 7 2.
Pendant Stations Type SKYP Worksheet Type SKYP Worksheet Control Products Use this worksheet to assist in component selection. SKYP Custom Pendant orders must be placed through the Product Selector in Quote to Cash. There is a 10% charge for assembly. Class 1. Operator or Closing Plate. Example: SKRU1 9001 Type Type Number Key 2. Legend Plate Type Number Example: SKN201 When the operator and the legend plate use 2 adjacent holes, specify the same catalog numbers in both locations. Example: 3.
Pendant Stations Type SKYP Dimensions Type SKYP Dimensions Class 9001 Type SK push-to-test pilot lights and remote-test pilot lights and potentiometers do not fit in these enclosures. Standard pilot lights do fit in these enclosures. For illuminated operators in the SKYP pendant station, the shallow depth light module (9001KM55 or 9001KM58) must be used. Figure 5: Type SKYP Dimensions A See Table 34 for NPT Size 3.19 81 2.15 54.48 4.38 111 2.32 59 2.12 54 4.79 122 4.00 102 7.37 187 4.33 110 2.
Pendant Stations Type SKYP Dimensions INDEX 2550101002 2550101020 2550101027 2550101036 2550101037 6508805201 6508805202 6508805203 6508805204 6508805205 6508805206 6508805210 6508805211 6508805212 6508805213 6508805214 BW90, BW100 DL1CB006 DL1CE012 DL1CE024 DL1CE048 DL1CE130 DL1CJUS0063 DL1CJUS0064 DL1CJUS0065 DL1CJUS0123 DL1CJUS0124 DL1CJUS0125 DL1CJUS0243 DL1CJUS0244 DL1CJUS0245 DL1CJUS1203 DL1CJUS1204 15–16 15–16 15–16 15 15 15–16 15–16 15–16 16 16 16 15 15–16 15 15–16 15–16 2 10 10 10 10 10 10 10 10
Pendant Stations Type SKYP Dimensions 21 © 2013 Schneider Electric All Rights Reserved 07/2013 ™
Schneider Electric USA, Inc. 1415 S. Roselle Road Palatine, IL 60067 USA 1-888-778-2733 www.schneider-electric.us © 2013 Schneider Electric All Rights Reserved Schneider Electric and Square D are trademarks owned by Schneider Electric Industries SAS or its affiliated companies. All other trademarks are the property of their respective owners.
