Product Overview

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Oct 22, 2015
1
Product data sheet
Characteristics
9038CG36
mech alternator -closed tank - NEMA 1 - screw-
in bushing - 4 NC DPST-DB contacts
Main
Range of product Square D Pumptrol
Product or component
type
Mechanical alternator
Device application Closed tank with bushing
Device short name 9038C
Product specific appli-
cation
Mechanically alternating the operation of two pumps
or motors
Electrical circuit type Power circuit
Quantity per set Set of 1
Type of packing Individual
Complementary
Product destination For closed tank
Device mounting Screw-in bushing
Cable entry number 8 knock-outs for 1/2" or 3/4"conduit UL 508
Contacts type and composition 4 NC snap action DPST-DB Form YY
Controlled fluid Corrosive fluid @ specific gravity of 0.85 in or higher 220 °F
Hydraulic oil @ specific gravity of 0.85 in or higher 220 °F
Sea water @ specific gravity of 0.85 in or higher 220 °F
Fresh water @ specific gravity of 0.85 in or higher 220 °F
Motor power kW 0.37 kW 0.5 hp @ 230 V DC
0.37 kW 0.5 hp @ 115 V DC
0.18 kW 0.25 hp @ 32 V DC
0.75 kW 1 hp @ 475 V AC 3 phases
0.75 kW 1 hp @ 460 V AC 3 phases
3.7 kW 5 hp @ 230 V AC 3 phases
2.2 kW 3 hp @ 230 V AC 1 phase
2.2 kW 3 hp @ 115 V AC 3 phases
1.5 kW 2 hp @ 115 V AC 1 phase
Electrical connection Screw-clamp terminals 10 AWG
Contact operation Contacts close on liquid rise
Float movement 4.75...9.25 in adjustable
Float position Left
Float rod angle 90° (offset)
Short circuit protection 20 A cartridge fuse gG
Local signalling With external pointer
Materials in contact with fluid Cast iron
316 stainless steel
Nitrile (Buna-N) or equivalent rubber
Yellow brass
304 stainless steel
Enclosure material Painted cold-rolled steel
Operating position Vertical position only
Electrical durability 100 cycles @ 60 cyc/mn
Mechanical durability 300 cycles
Terminal block type 8 terminals
Operating rate 60 cyc/mn
[Ui] rated insulation voltage 575 V UL 508
Product weight 8.67 lb(US)