Brochure

Selection (continued)
Type JCK Electronic Timing Relays
Type JCK60 – JCK70
Programmable Timers
Class 9050 Type JCK programmable timers are microprocessor controlled to provide flexibility with accurate timing. The Type JCK60 On Delay
timer has seven programmable timing ranges. The Type JCK70 multifunction timer has 10 timing functions and seven programmable timing
ranges. To program the timers, remove power and select the timing range and timing functions. Settings of less than 0.05 seconds are not
recommended due to the response time of the electromechanical outputs.
Type JCK60 (On Delay)
This On Delay timer uses a push-button thumbwheel to select the timing range, and uses three push-button thumbwheels to select the time value.
Timing Function Timing Ranges Type
On Delay
0.01 s
0.1 s
S
0.1 m
M
0.1 h
H
0.05–9.99 seconds
0.1–99.9 seconds
1–999 seconds
0.1–99.9 minutes
1–999 minutes
0.1–99.9 hours
1–999 hours
JCK60 (1)
(1) The voltage code must be specified to order this product. Refer to standard voltage codes listed below and insert the code as shown in “How To Order” below.
Type JCK70 (Multifunction)
One 10-position push button thumbwheel is used to select the function. Three 10-position push button thumbwheels are used to select the time
value. One 7-position push button thumbwheel is used to select the timing range.
Timing Functions Timing Ranges Type
On Delay
Interval
Off Delay
One Shot
Repeat Cycle–Off (1)
Repeat Cycle–On (1)
On/Off Delay
1 Shot Falling Edge
Watchdog
Trig. On Delay
0.01 s
0.1 s
S
0.1 m
M
0.1 h
H
0.05–9.99 seconds
0.1–99.9 seconds
1–999 seconds
0.1–99.9 minutes
1–999 minutes
0.1–99.9 hours
1–999 hours
JCK70 (2)
(1) The Repeat Cycle function uses the same On and Off times.
(2) Specify the voltage code when ordering this product. Refer to the standard voltage codes listed below and insert as shown in How To Order.
Note: Turn off power to the 9050JCK70 before changing the timing function.
Voltage Codes
Voltage Code
12 Vdc V36
24 Vac / Vdc V14
48 Vac / Vdc V17
120 Vac / 110 Vdc V20
Features:
˚ Up to ±0.1% repeat accuracy
˚ Timing from 0.05 seconds to 999 hours
˚ Available in up to 10 timing functions
˚ DPDT contacts (2 N.O. & 2 N.C.)
˚ 10 A contact rating
˚ Transient protected
˚ Hold-down spring available
˚ Wide timing range
˚ Horsepower rated
File E78351
CCN NLDX2
(without
socket)
File 78351
CCN NLDX
(with the
proper
socket from
page 10 )
File 214768
Class 3211 07
How to Order Type JCK Timers
To Order, Specify:
Catalog Number Example
Class Type Voltage Code
Class Number
Type Number
Voltage Code
9050 JCK60 V24
7