Technical Data Bulletin

3-20
© 2019 Schneider Electric
All Rights Reserved
Heavy Duty Safety Switches Accessories and Special Features
www.se.com/us
Class 3110 / Refer to Catalog 3100CT1602
Cover Viewing Window
Optional cover viewing window is positioned over the blades to allow visual verification of
“ON-OFF” status. Available on 30 through 1200 A heavy duty switches, NEMA Type 1,
3R, 4/4X/5 Stainless Steel, 12 and 12K. (Not avaliable on NEMA Type 4X, Fiberglass,
Krydon or NEMA Type 7 and 9 switches). Add VW suffix to the catalog number for factory
installation.
Voltage Monitors
Voltage monitors installed on safety switches indicate when voltage is present, helping to
prevent arc-flash hazards and electric shocks during maintenance work. Voltage
monitors can be combined with other safety features such as Key Interlock, Viewing
Windows or Lock-ON provisions.
•
UL Listed
•
Factory installed only
•
Order the voltage monitors by adding the appropriate suffix shown in the table below
to the switch catalog number
•
Not available on NEMA Type 7 and 9 and NEMA Type 4X Fiberglass and Krydon
TM
switches
Table 3.38: Voltage Monitors
[90] [91] [92]
Description Suffix [93]
Line Side Monitor SI
Load Side Monitor LI
Line and Load Side Monitors LI2
Copper Lug Kits
Al/Cu to Cu Only
Lug kits that accept only copper wire are available for field or factory installation:
•
UL Listed
•
UL Marine Listed
– UL Marine listing is applicable ONLY to 30 - 200 A, NEMA Type 12/3R, NEMA Type
12K and NEMA Type 4/4X/5 stainless steel, safety switches
– When copper only lugs kits are factory installed the switch will bear the UL Marine
mark and be suitable for use on vessels over 65 feet long
– When the copper only lugs kits are field installed the switch will not bear the UL
Marine mark and would not be suitable for use on vessels over 65 feet long
•
Not available for use on NEMA Type 4X Fiberglass, Krydon or NEMA Type 7 and 9
switches
•
For field installation, order copper lug kits. See Table below
•
For factory installation of copper lugs, add the suffix SLC to the standard catalog
number
Table 3.39: Copper Lug Kits
[94]
Amperes Lug Kit Cat. No. Lug Wire Range AWG/kcmil
30–60 CL0306F
(1) 14-8 Cu solid or
14-4 Cu stranded
100 CL10F
(1) 14-8 Cu solid or
14-1/0 Cu stranded
200 CL20F
(1) 6-250 Cu
400 CL40F
(1) 1-600 Cu plus
(1) 6-250 Cu
600 CL60F
(1) 4-350 Cu
800 — —
1200 — —
3
SAFETY SWITCHES
[90] Available on 30–1200 A Heavy Duty Safety Switches.
[91] Order 600 Vac Heavy Duty Safety Switch for all 30–60 A 240 Vac applications.
[92] Available on 30–200 A Double Throw Safety Switches. Two and three-pole, 200 A Type 3R switches are not available with these voltage monitors.
[93] In addition to the suffix shown in the table above, a 3 must be added to the switch catalog number for all 30 and 60 A switches, i.e. H361AWK becomes H3613AWKLI. 30 and 60 A switches
require 100 A enclosure accessories. Double Throw Safety Switches are exempt from this requirement.
[94] One kit includes all phase line/load lugs for a 3-pole switch. CL0306F, CL10F and CL20F includes six lugs. CL40F and CL60F includes twelve lugs.
9/13/2019