Brochure

PowerPact H-, J-, and L-Frame Circuit Breakers
Trip Units
104
02/2016 © 2011–2016 Schneider Electric
All Rights Reserved
User-Defined Applications
User-defined applications are processed by the I/O application module in addition to the pre-defined
application selected.
The user-defined applications are available depending on:
• the pre-defined application selected
• the I/O application module resources (inputs and outputs) not used by the application.
The resources required by user-defined applications are assigned using the customer engineering
tool:
• protection
• control
• energy management
• monitoring.
Mounting
The I/O application module is a DIN rail mounted device. Install on a steel DIN rail that is properly
grounded near the device.
Application Rotary Switch
The application rotary switch enables the selection of the pre-defined application. It has nine positions
and each position is assigned to a pre-defined application. The factory set position of the switch is pre-
defined application one.
Setting Locking Pad
The setting locking pad on the front panel of the I/O application module enables the setting of the I/O
application module by the customer engineering tool.
1
2
3
4
5
6
7
8
9