Product Brochure

3
Combination
flush/surface covers
Homeline indoor
covers for 8 circuit
and larger panels are
combination flush/
surface to meet all
mounting situations.
Floating, spring-
mounted trim provides
automatic flush adjust-
ment to ensure proper
breaker and trim
alignment without
manual adjustment to speed final installation.
Covers are included with the load center for
purchasing convenience, and individually
packaged to reduce the chance of shipping
damage, making them easier to store
between rough-in and trim-out. Covers now
include provisions for a door lock, and the
trim has the top two branch circuit twistouts
removed to make it easier to remove
remaining twistouts.
Complete line of accessories
A complete line of Homeline Load Center
accessories maximizes application flexibility.
From ground bar kits to bolt-on rainproof
hubs, filler plates, door locks, and more,
Homeline Load Centers satisfy almost any
installation requirement.
Rainproof enclosures
Homeline Load Centers are available in a
full line of NEMA Type 3R rainproof enclo-
sures, with Square D type rain-tight bolted
(RB) hub for fast and convenient top-feed
conduit connection. Side-opening devices
feature a stainless steel door latch and center
mounting on back.
1. Panels are
available as either
main breaker
or main lugs.
2. Straight-in wiring
mains design
helps reduce the
need to bend
service cable,
cutting waste and
saving installation
time.
3. Convertible
mains let you
meet changing
job site require-
ments fast by
field converting
between main
breaker and
main lugs. For
maximum
flexibility our
“universal mains”
panels are
provided without
mains, allowing
you to add a
field-installed
main circuit
breaker or main
lugs kit to meet
either application.
4. Standard
22,000/10,000
ampere short
circuit current
rating on main
breaker – provides
increased high
fault current
protection when
needed, without
changing the
entire panel.
5. Panel interiors are
easily removed
for paint or theft
protection. Single,
captive screw
can’t be lost;
interior mounts
quickly and easily
(indoor only).
6. Split branch
neutral, with up
to 50% more
terminations
than required,
reduces clutter
and simplifies
wiring.
7. Combination
slot/square-drive
neutral, ground
and cover screws
let you use either
a standard flat-
blade screwdriver
or a square-head
driver for reduced
slippage and
improved torque.
8. Bus and interior
assembly is
among the most
rugged in the
industry.
9. Three ground
bar mounting
locations (left,
right and bottom)
let you pick the
easiest spot to
wire.
Homeline Load Center Features
10. Tangential
main service
knockouts
eliminate the
need for costly
service conduit
offset, simplify-
ing and speeding
installation.
11. Complete load
center rotates for
top or bottom
feed to meet job
site requirements
and reduce
service cable
waste.
12. Automatic flush
adjustment cover
(below) speeds
installation,
especially on
uneven wall
surfaces.
12
Homeline Brochure 2006 3/6/06 2:59 PM Page 3