Brochure

8-42
© 2019 Schneider Electric
All Rights Reserved
Operating Mechanisms for Circuit Breakers Flexible Cable Mechanisms
schneider-electric.us
Class 9422 / Refer to Catalog 9420CT9701
8
OPERATING MECHANISMS AND
DISCONNECT SWITCHES
Dual Cable Operating Mechanisms for Square D
™
Circuit Breakers
9422CSFD33
Dual Cable Operating Mechanisms are designed for use with Square D brand
PowerPact
™
B, D, H, J, and L circuit breakers through 600 A frame sizes. The cable
mechanisms allow for a single handle operator, Class 9422Ax, to operate both circuit
breakers. The cable mechanism is designed especially for tall, deep enclosures where
placement flexibility is required. There are numerous cable arrangements to choose from
to accommodate many applications.
Features
•
Separate cables for each circuit breaker
•
Rugged metal flange handle operator
•
Maximized flexibility of circuit breaker placement for existing and new applications
•
Control panel can be fed from two separate supply voltages (if required)
•
Dual mechanism allows both separate supply voltages to be controlled by a single
handle to improve security features
Table 8.95: Dual Cable Operating Mechanisms Selection
Circuit Breaker Type
Cable Length
in. / mm (quantity)
Catalog
Number
Frame Size
(max.)
PowerPact B
120 in. / 3048 mm (2)
9422CSBD1
125 A
36 in. / 914 mm (1)
60 in. / 1524 mm (1)
9422CSBD35
60 in. / 1524 mm (1-CSF 3 pole)
60 in. / 1524 mm (1-CSF 4 pole)
9422CSBD55
36 in. / 914 mm (1)
120 in. / 3048 mm (1)
9422CSBD31
36 in. / 914 mm (2)
9422CSBD33
60 in. / 1524 mm (1)
120 in. / 3048 mm (1)
9422CSBD51
PowerPact H & J
MG NSF
120 in. / 3048 mm (2)
9422CSFD1
250 A
36 in. / 914 mm (1)
60 in. / 1524 mm (1)
9422CSFD35
60 in. / 1524 mm (1-CSF 3 pole)
60 in. / 1524 mm (1-CSF 4 pole)
9422CSFD345
36 in. / 914 mm (1)
120 in. / 3048 mm (1)
9422CSFD31
36 in. / 914 mm (2)
9422CSFD33
60 in. / 1524 mm (1)
120 in. / 3048 mm (1)
9422CSFD51
60 in. / 1524 mm (2)
9422CSFD55
PowerPact D & L
MG NSJ
60 in. / 1524 mm (2-CSJ) 9422CSJD50 [7]
600 A
120 in. / 3048 mm (2-CSJ) 9422CSJD10 [8]
60 in. / 1524 mm and
120 in. / 3048 mm (2-CSJ)
9422CSJD51[8]
120 in. / 3048 mm (1-CSF) and
120 in. / 3048 mm (1-CSJ)
9422CSFJD10
250 A
and
600 A
60 in. / 1524 mm (1-CSF)
60 in. / 1524 mm (1-CSJ)
9422CSFJD50
Handle Mechanisms
Handle Mechanisms
NOTE: Type 9422A1Y is a 6-in. yellow base with gray handle and red
knob.
These handle mechanism kits are used with the circuit breaker variable depth and cable
operating mechanisms. The kits contain all parts necessary for mounting the handle to
the flange of the enclosure. Types A1–A4, A1Y, and AP1 are suitable for right or left-
hand flange mounting.
Table 8.96: 9422 Disconnect Switch and Circuit Breaker Handle Mechanisms
Handle Depth (in.)
NEMA Type 1, 3, 3R, 4, 12
Enclosures
NEMA Type 4, 4X Stainless
Steel Enclosures
Cat. No. Cat. No.
4 [9]
9422A3 9422A4
6 [9]
9422A1
9422A2
9422A1Y [10]
6 [11]
9422AP1 9422AP2
10 [12]
9422A9 9422A10
10 9422AP9 9422AP10
12 [13] [14]
9422A7 9422A8
NOTE: See Handle Information, page 8-34 for dimensional information.
[7] Must use the 9422AP1 or 9422AP2 operating handle with this operating mechanism.
[8] Must use the 9422AP1 or 9422AP2 operating handle with this operating mechanism.
[9] Use with 30–200 A, 9422 switches and all circuit breaker mechanisms.
[10] Yellow base with gray handle and red knob.
[11] Use only with 9422RM1, 9422CMP, and PowerPact M and P operating mechanisms.
[12] Use with Type D2 remote or dual adapter kit.
[13] Use only with 400 A, 9422TG1 and 9422TG2 disconnect switch.
[14] Adjustable depth.