Brochure

8-34
© 2019 Schneider Electric
All Rights Reserved
Flange Mounted and Cable Operated Accessories, Disconnect Switches
schneider-electric.us
Class 9422 / Refer to Catalog 9420CT9701
8
OPERATING MECHANISMS AND
DISCONNECT SWITCHES
Handle Information for 9422 Disconnect Switches
Type A1
The Handle Mechanism Kit contains all parts needed to mount the handle to the flange of
the enclosure. Two flange mounting methods are offered. For right or left hand flange
mounting use Types A1–A4 and Types A9–A10 kits. For right-hand mounting only, use
Type A5–A8 handles. The type AP1 and AP2 handles are used exclusively on the
PowerPact™ M and P operating mechanisms, 9422 RM1 and 9422 CMP. The
dimensions are identical to 9422 A1.
Handle Mechanisms
Handle Mechanisms
NOTE: Type 9422A1Y is a 6-in. yellow base with gray handle and red
knob.
These handle mechanism kits are used with the circuit breaker variable depth and cable
operating mechanisms. The kits contain all parts necessary for mounting the handle to
the flange of the enclosure. Types A1–A4, A1Y, and AP1 are suitable for right or left-
hand flange mounting.
Table 8.77: 9422 Disconnect Switch and Circuit Breaker Handle Mechanisms
Handle Depth (in.)
NEMA Type 1, 3, 3R, 4, 12
Enclosures
NEMA Type 4, 4X Stainless
Steel Enclosures
Cat. No. Cat. No.
4 [10]
9422A3 9422A4
6 [10]
9422A1
9422A2
9422A1Y [11]
6 [12]
9422AP1 9422AP2
10 [13]
9422A9 9422A10
10 9422AP9 9422AP10
12 [14] [15]
9422A7 9422A8
NOTE: See Handle Information, page 8-34 for dimensional information.
Accessories
Class R Fuse Kits
Handle Mechanisms
When installed, this kit rejects all fuses except Class R. The kits are available for field
installation. With rejection kit and Class R fuses installed, the switch is UL component
recognized for use on systems with fault current up to 200,000 RMS symmetrical
amperes.
Table 8.78: Class R Fuse Kits
Disconnect Switch
Type
Switch
Type
Fuse Clip Rating
Class R Kit
250 V 600 V Cat No.
30 A
TCF30 30 — RFK03
TCF33 60 30 RFK06
60 A
TDF60 60 30 RFK06
TDF63 — 60 RFK06H
100 A TEF10 100 100 RFK10
200 A
TF2 200 200 9999SR4
TF3 200 200 9999SR4
400 A TG2 400 400 9999SR5
[10] Use with 30–200 A, 9422 switches and all circuit breaker mechanisms.
[11] Yellow base with gray handle and red knob.
[12] Use only with 9422RM1, 9422CMP, and PowerPact M and P operating mechanisms.
[13] Use with Type D2 remote or dual adapter kit.
[14] Use only with 400 A, 9422TG1 and 9422TG2 disconnect switch.
[15] Adjustable depth.