Square Register Getting Started 1955 Broadway Ste 600, Oakland, CA 94612 PROJECT X2B Packaging DELIVERABLE GSG - 16pg - US INKS/COATING 1/1 + Matte AQ MATERIAL 128g text C2S - SUN SIZE Flat: 272mm x 136mm Folded: 136mm x 136mm VENDOR Veritiv China FINISHING diecut, fold, staple DESIGN Eric Manago PRODUCTION Mike O’Neal MODIFIED November 4, 2020 1:00 PM PROGRAM MANAGER Isabel Turnquist BLACK PRODUCTION NOTES FILE NAME M-LIT-0239-03_X2_GSG_16-pages_US_M02 PART # REV MECHANICAL # M-LIT-0239 -
WELCOME TO SQUARE Let’s get your Square Register up and running. Start by taking a quick look at what’s in the box.
SETTING UP SQUARE REGISTER Start by connecting Square Register to the hardware hub and power adapter. Docking the customer display Register can be used in both docked and undocked configurations. To dock your customer display to Register, follow these two simple steps. Square Register 1. Line up the heel of the customer display with the corresponding dock on Register. 2. Gently press the customer display until you feel it click and lock into place.
HOW TO TAKE PAYMENTS (DOCKED) HOW TO TAKE PAYMENTS (UNDOCKED) Position Register so customers can easily see the customer display and pay with their cards and devices. To take a payment, ring up the sale and tap Charge. Make sure the customer display is correctly oriented so it’s sitting horizontally on your countertop. Position the customer display so your customers can easily see it and pay with their cards and devices. To take a payment, ring up the sale and tap Charge.
MOUNT SQUARE REGISTER TO YOUR COUNTER WITH ADHESIVE 1. Prepare the adhesive strips 3. Twist and lock Grab the mounting plate. Remove the backing from the adhesive strips located on the underside of the plate. Place Register onto the mounting plate with the larger screen facing right. Make sure the cleat is positioned in its slot. Turn Register 90 degrees clockwise so it locks into place. 2 1 2.
MOUNT SQUARE REGISTER TO YOUR COUNTER WITH SCREWS 1. Pick a spot 3. Position properly Grab the mounting plate. Pick a spot on your counter for Register, position the plate, and use a pencil to mark the four screw holes on your counter. Make sure the raised cleat is on your side of the counter, not the customer’s side. Note: Maximum counter thickness is 2 inches (50 mm). Position the mounting plate onto the holes you’ve drilled, then insert a screw into each hole.
CONNECT TO THE INTERNET VIA ETHERNET OR CONNECT USB ACCESSORIES Ethernet: Plug one end of an Ethernet cable into the hub and the other into a modem or Ethernet port. HELP AND SUPPORT Read our FAQs, learn more about compatible hardware, and get troubleshooting support at square.com/register-setup. HARDWARE WARRANTY You’re covered from defects for up to two years under a limited warranty. See square.com/warranty.
© 2020 Square, Inc., 1455 Market St., Ste. 600, San Francisco, CA 94103. Square, the Square logo, and Square Register are trademarks of Square, Inc.