Getting Started Guide

MOUNT SQUARE REGISTER TO YOUR COUNTER WITH ADHESIVE

1. Prepare the adhesive strips

Grab the mounting plate. Remove the backing

from the adhesive strips located on the underside

of the plate.

2. Position properly

Make sure the raised cleat of the mounting plate

is on your side of the counter, not the customer’s

side. Adhere the plate to your counter in the

desired position and press down ﬁrmly for 30

seconds. Wait 30 minutes for the adhesive to set.

If you need to remove the plate, slowly pull the

tabs on the adhesive strips until they release.

3. Twist and lock

Place Register onto the mounting plate with the

larger screen facing right. Make sure the cleat is

positioned in its slot. Turn Register 90 degrees

clockwise so it locks into place.