TM Podcast Equipment Bundle User Manual
I. Introduction for Control Panel: 1.Power: Keep press for about 3 seconds to turn ON/OFF 2.TREBLE: Treble volume adjustment 3.Bass: Bass volume adjustment 4.Back track: Adjust the volume and the accompany indicator will be changed accordingly 5.Record: Recording volume adjustment 6.Monitor: Monitor earphone volume adjustment 7.MIC VOL: Microphone volume adjustment 8.ECHO: Echo volume adjustment 9.Indicator Lights: Display different lights according to debugging 10.
example, you can't hear each other when playing games. When "Internal play" is on, and the voice of your teammates will not be heard during the game. In the live broadcast, if heard in the livebroadcast room. 15.Mute: In mute mode, your voice can not be recorded. 16.EMC/Pro/Pop/Karaoke: Scene mode, the indicator light indicates that it has the microphone. 17. : Press this key repeatedly to switch to change your voice to Male/Femaile/Child/Monster. 18.
2. Wireless connection V8S 1. Open BT on smartphone/tablet 2. After the BT device "V8S" is detected, click “V8S" to connect. 3. The wireless function only support to input accompany music. 4. When the sound console has been connected with wireless, other device will can`t find the sound console in their BT list. Please disconnect the previous device when you want to connect it to new device via wireless. 3.
4. Dual smarthone live connection Condenser mic 2 Condenser mic 1 Headset Monitor Backing Track LIVE2 LIVE1 PCLIVE Tip: If your phone/tablet do not have a 3.5mm audio jack, you need an adapter. Please get the adapter from smartphone brand offical shop. 5.
. Computer Live&Accompany Connection 1. To live broadcast on a computer/laptop, you need to connect the charging port of the sound console through the USB charging cable. 2. The computer will automatically identify and install the sound card driver. Condenser mic 2 Condenser mic 1 Headset Monitor Backing Track LIVE2 LIVE1 PCLIVE III.
To check if the sound card has been identified and installed by the computer: 1. Right-click the loudspeaker on the taskbar of the computer, open “Playback device ". If "V8S" is displayed and set as the default, it means the sound card has been recognized by the computer and installed successfully 2. Right-click the loudspeaker on the taskbar of the computer, open “Recording equipment ".
3. When using the sound card, all interfaces need to be fully plugged in.If the mobile phone has a phone case, please remove the case to avoid the shell against the plug. 4. When using the computer/laptop for live broadcast or accompaniment, directly connect the computer USB interface and the sound card charging interface with the charging cable.Don’t use the live ports to connect a computer or laptop.
3. When using the sound card, all interfaces need to be fully plugged in.If the mobile phone has a phone case, please remove the case to avoid the shell against the plug. 4. When using the computer/laptop for live broadcast or accompaniment, directly connect the computer USB interface and the sound card charging interface with the charging cable.Don’t use the live ports to connect a computer or laptop.
V. Set the condenser microphone Screw on the mic Adjust the gradient Tip: Tilt the microphone slightly to help maintain balance. VI. Support Offical website: www.squarock.com E-mail: support@squarock.com sales@squarock.com Amazon shop: www.amazon.com/shops/squarock Facebook business page: www.facebook.