User's Manual

48
STRIDE2400 Terminal Station Setup Guide
3.3 Installing the STS Power Pack
The STS Power Pack converts 110 VAC to +24VDC and houses the batteries to provide backup power
to the STS. This section describes the procedures for installing the STS Power Pack.
To install the STS Power Pack
1. Mount the STS Power Pack, as described in Section 3.3.1 on page 49.
2. Ground the STS Power Pack, as described in Section 3.3.2 on page 54.
3. Connect the STS power cables, as described in Section 3.3.3 on page 56.
4. Install the STS Backup Battery as described in Section 3.3.4 on page 64.
5. Power-up the STS Power Pack, as described in Section 3.3.5 on page 68.
6. Power-up the STS Power Pack, as described in Section 3.3.5 on page 68.
7. Verfying the status of the STS Power Pack LED Indicators, as described in Section 3.3.6 on
page 70.