User Manual

7
Begin the pairing session
at the rear derailleur. Press
and hold the function button
on the rear derailleur until
the green LED blinks slowly,
then release.
Begin the pairing session
at the rear derailleur. Press
and hold the function button
on the rear derailleur until
the green LED blinks slowly,
then release.
Begin the pairing session
at the rear derailleur. Press
and hold the function button
on the rear derailleur until
the green LED blinks slowly,
then release.
Begin the pairing session
at the rear derailleur. Press
and hold the function button
on the rear derailleur until
the green LED blinks slowly,
then release.
Begin the pairing session
at the rear derailleur. Press
and hold the function button
on the rear derailleur until
the green LED blinks slowly,
then release.
Begin the pairing session
at the rear derailleur. Press
and hold the function button
on the rear derailleur until
the green LED blinks slowly,
then release.
Begin the pairing session
at the rear derailleur. Press
and hold the function button
on the rear derailleur until
the green LED blinks slowly,
then release.
Begin the pairing session
at the rear derailleur. Press
and hold the function button
on the rear derailleur until
the green LED blinks slowly,
then release.
Begin the pairing session
at the rear derailleur. Press
and hold the function button
on the rear derailleur until
the green LED blinks slowly,
then release.
System Pairing System Pairing System Pairing
System Pairing System Pairing System Pairing
System Pairing System Pairing System Pairing
Install
Einbauen
Instalación
Installer
Installare
Monteren
Instalar
NOTICE
The rear derailleur is the master device,
and the pairing session begins with
the master device. The LED on the rear
derailleur and the device being paired
will blink quickly when the device is
successfully paired.
Steps 2-4 can be done in any order.
The rear derailleur LED light will blink
when it has received and executed a
command.
NOTICE
The rear derailleur is the master
device, and the pairing session begins
with the master device. The LED on
the rear derailleur and the device
being paired will blink quickly when
the device is successfully paired.
Steps 2-4 can be done in any order.
The rear derailleur LED light will blink
when it has received and executed a
command.
NOTICE
The rear derailleur is the master device,
and the pairing session begins with
the master device. The LED on the rear
derailleur and the device being paired
will blink quickly when the device is
successfully paired.
Steps 2-4 can be done in any order.
The rear derailleur LED light will blink
when it has received and executed a
command.
NOTICE
The rear derailleur is the master device,
and the pairing session begins with
the master device. The LED on the rear
derailleur and the device being paired
will blink quickly when the device is
successfully paired.
Steps 2-4 can be done in any order.
The rear derailleur LED light will blink
when it has received and executed a
command.
NOTICE
The rear derailleur is the master
device, and the pairing session begins
with the master device. The LED on
the rear derailleur and the device
being paired will blink quickly when
the device is successfully paired.
Steps 2-4 can be done in any order.
The rear derailleur LED light will blink
when it has received and executed a
command.
NOTICE
The rear derailleur is the master device,
and the pairing session begins with
the master device. The LED on the rear
derailleur and the device being paired
will blink quickly when the device is
successfully paired.
Steps 2-4 can be done in any order.
The rear derailleur LED light will blink
when it has received and executed a
command.
NOTICE
The rear derailleur is the master device,
and the pairing session begins with
the master device. The LED on the rear
derailleur and the device being paired
will blink quickly when the device is
successfully paired.
Steps 2-4 can be done in any order.
The rear derailleur LED light will blink
when it has received and executed a
command.
NOTICE
The rear derailleur is the master
device, and the pairing session begins
with the master device. The LED on
the rear derailleur and the device
being paired will blink quickly when
the device is successfully paired.
Steps 2-4 can be done in any order.
The rear derailleur LED light will blink
when it has received and executed a
command.
NOTICE
The rear derailleur is the master device,
and the pairing session begins with
the master device. The LED on the rear
derailleur and the device being paired
will blink quickly when the device is
successfully paired.
Steps 2-4 can be done in any order.
The rear derailleur LED light will blink
when it has received and executed a
command.
1