User Manual
Headphone Specification
LED Indicator Light
Pairing: Blue and red lights flash alternately
ANC ON: Green light turns on
Playing:Blue light slowly flashes
Paired: Blue light flashes
Battery Low: Red light turns on with voice prompt
Full Charge: Red light turns off or Blue light turns
on
Charging: Red light turns on
ANC OFF: Green light turns off
Bluetooth OFF: Blue and red lights turn off
Technical Specification
•Product name: Srhythm NC35
•Battery capacity: 1000mAh
•Input: 5V-12V •Chip: CSR
•Charging time: About 1-2 hours
•Use time: 50 hours
•Bluetooth version: V5.0
•Bluetooth profile: A2DP, AVRCP, HSP, HFP, CVC
•Bluetooth range: 10m/33ft
•Waterproof rating: IPX4
•Frequency response: 20–20KHz
•Driver diameter: Φ40mm
•Net weight: 180g •Impedance: 32 Ω
* Please kindly note that perhaps sometimes these
LED indicator light color will be mixed to become
other colors(pink,purple,etc.) occasionally.
English
English
23 24
Delete Pairing: Hold both "Volume Up" and
"Volume Down" buttons simutaneously for 5
seconds
If any issues, here tips for you:1. Full charge your
headphone(connect to 5-12V fast charger[Not
included])2. Reset headphone by inserting audio
cable into headphone audio socket then removing
it. Or the upgraded NC35 headphones would be
reset automatically when charging.
Charging
Use the included Type-C charging cable to connect to
headphone Charging Port. Connect the other end of
charging cable to a computer USB port or USB wall
charger under 6.3V voltage.Turn off headphone
Bluetooth and ANC function before charging.Please
don't use headphone while charging.The LED
indicator light will be off or blue color when full of
charge basing on headphone turn off status.
Hold the Multi-function Button for 3-5 seconds to
turn headphone Bluetooth off.
Start your mobile phone Bluetooth and find
headphone Bluetooth pairing name NC35 to click it to
pair.(the LED indicator light will be blue flashing
slowly after pairing successfully.)