User Manual

19 20

Function Details

Easy Pairing

1. Hold the Multi-function Button for 3-5 seconds to

turn headphone Bluetooth on,then enter

2. Keep headphone and your mobile phone as close

as possible during pairing process.

4. If you are asked for a password/PIN code during

pairing procedure,please enter "0000" (four zeros).

pairing mode.(the LED indicator light will be blue and

red flashing quickly.)

3. Turn on your mobile phone Bluetooth. Search for

headphone Bluetooth signal on mobile phone and

click "Srhythm NC35" to pair.(the LED indicator light

will be blue flashing slowly after pairing successfully.)

Pair to the Second Bluetooth Device

1. Please make sure that headphone is connected to

the first Bluetooth device successfully and music is

not playing.

4. Return to the first Bluetooth device and pair it with

headphone again. Now both of your devices are

paired with headphone.

2. Hold the Multi-function button until the

headphone switch off and continue with the steps

"Easy Pairing"(Let the headphone re-enter pairing

mode,the LED indicator light will flash blue and red

alternately).

3. Pair headphone with the second device according

to "Easy Pairing" steps.

Active Noise Canceling(ANC) ON/OFF

(the LED indicator light will be green when ANC ON.)

(the LED indicator light green color will be off when

ANC OFF.)

To turn off ANC, press the ANC Button;

To turn on ANC, press the ANC Button;

Wired Mode

ANC also works in wired mode.Microphone only

works in Bluetooth mode,not for wired mode.

Buttons can't be used in wired mode (Except the

ANC Button).

Headphone support AUX input for wired external

audio source connection. Simply turn headphone

Bluetooth off and plug in the audio cable.For any

ANC Bluetooth headphone,it is still need battery

power support for wired mode.

English