User Manual

Parameters:
Wireless Noise Cancelling Earbuds S7
Wireless charging and wired charging are both workable.
Load impedance
Frequency range
Battery life
Maximum noise deduction
Water proof level
Bluetooth version
Sensitivity
Bluetooth Support
Charging Time (Charging Box)
Operating voltage
Battery capacity
Weight
32Ω
2.402G-2.480G
1000 times
>-28dB
IPX5
V5.1
- 94 dBm
AAC,SBC,A2DP,HFP,HSP,AVRCP,etc.
1-2 Hours (Wired Charging)
Earphone 3.7V
Earphone 65mAH Charging box 600Mah
9g for single earphone 48g for charging box
Start Pairing:
Open the "Bluetooth" function on your phone,search for "S7"
and click it to connect.The pairing is successful when the
blue and white LED indicator lights are off.
Automatic Pairing:
Normally your earbuds will automatically pairing with your
mobile next time once ever paired successfully.Sometimes
perhaps still need you to click the Bluetooth pairing name
"S7"on your mobile.
*After taking out earbuds from the charging box,if it is not
used about five minutes,earbuds will automatically shut
down to save power.Touch and hold the touchpad of earbuds
for 2-3 seconds to turn earbuds on.
*If connect with other devices,please firstly disconnect or
cancel the pairing in the Bluetooth control panel on your
phone,your S7 will enter standby state after disconnecting.
* Above data are all from the laboratory and for reference only.
*The charging time of charging box will be prolonged if charging box is not in middle of
wireless charging base.Because wireless charging base transmits power in the form of coils..
Enter Pairing Mode:
English
2
Before Pairing:
1. Taking out the earbuds from charging
case
2. Tear off protective film and throw them
away. If low battery, please charge.
3. Wait 5 seconds to let earbuds pair with
itself automatically.One earbud will flash
light and the other will not if paired suc-
cessfully.
Protective film