User Manual

Replace Silicone Earplug and Ear-tips:
Align the hole in the silicone earplug
with the hole in the earbuds
Q&A:
1.Why can't the earbuds connect to each other successfully?/Why do I only hear the sound
on one side?
Here are 3 ways to connect:
The First Way: Ignore Bluetooth pairing name S7, then close and reopen your device’s
Bluetooth.
The Second Way: Put earbuds back in the charging box, close and reopen the charging box,
then take earbuds out to repair.
The Third Way: Reset earbuds as below steps：How to reset the earbuds?①②③④⑤
2.How to reset the earbuds?
Reset Earbuds:
Please remember to charging earbuds to be full power before resetting it.
①Take earbuds out of the charging box, long press both earbuds’ touchpads for 5 seconds to
turn earbuds off. A beep and a female voice prompt: Power Off can be heard.
②Long press both earbuds’ touchpads for 12 seconds,during this process, earbuds are from
turning on to off. The Voice: Power on, Pairing mode and four beeps can be heard
sequentially.
③Put earbuds into the charging box, close and reopen it when light of charging box is on.
④Take out earbuds from charging box again, and wait a few seconds for earbud and earbud
pairing automatically. One earbud will flash light and the other earbud will not if paired
successfully.
⑤Ignore Bluetooth pairing name S7 on your device.Close and reopen your device’s
Bluetooth.Find the pairing name S7 and click to pair. Voice prompt:Connected can be heard.
3.How to turn off the earbuds?
Solutions:3 ways to turn off your earbuds:
The First Way: Touch and hold the touchpad 5 seconds when they are not connected to mobile
devices.
The Second Way: Put earbuds into charging box to turn off earbuds automatically.
The Third Way: Earbuds will power off automatically if there is no connection with a Bluetooth
device about 5 minutes after powering on.
4.How to turn on the earbuds?
Solutions:2 ways to turn on your earbuds:
The First Way: Touch and hold the touchpad for 2-3 seconds to turn earbuds on.
The Second Way: Put earbuds into charging case,then take out of earbuds,that turn on auto-
matically.
5.Why is one earbud workable and the other one earbud unworkable when I take earbuds
out of charging box?
Solution: It doesn't mean that the earbud is broken.As when earbud is charging,you did not put
the earbud on right position,or there is dust/something else remain on the charging connection
parts of earbud which affect charging.So the unworkable one earbud is out of power.
Need to use a certain amount of
force to remove the earplugs
English
5