User Manual

Use ANC Function
How to Use
Press the ANC Button to turn Active Noise
Cancellation ON/OFF
(the LED indicator light will be green when ANC
ON.)
Use Bluetooth Function
2.Start your mobile phone Bluetooth and find
headphone Bluetooth pairing name "NC25" to
click it to pair.(the LED indicator light will be
blue flashing slowly after pairing successfully.)
3.Hold the Multi-function Button for 3-5
seconds to turn headphone Bluetooth off.
1.Hold the Multi-function Button for 3-5
seconds to turn headphone Bluetooth on,then
enter pairing mode.(the LED indicator light will
be blue and red flashing quickly.)
Press to adjust volume. Long press to
skip to next/previous song.
Function Details
Easy Paring
2. Keep headphone and your mobile phone as close
as possible during pairing process.
pairing mode.(the LED indicator light will be blue and
red flashing quickly.)
1. Hold the Multi-function Button for 3-5 seconds to
turn headphone Bluetooth on,then enter
3. Turn on your mobile phone Bluetooth. Search for
headphone Bluetooth signal on mobile phone and
click “NC25” to pair.(the LED indicator light will be
blue flashing slowly after pairing successfully.)
4. If you are asked for a password/PIN code during
pairing procedure,please enter "0000" (four zeros).
Pair to the Second Bluetooth Device
1. Please make sure that headphone is connected to
the first Bluetooth device successfully and music is
not playing.
2. Hold the Multi-function button until the
headphone switch off and continue with the steps
"Easy Pairing"(Let the headphone re-enter pairing
mode,the LED indicator light will flash blue and red
alternately).
3. Pair headphone with the second device according
to "Easy Pairing" steps.
4. Return to the first Bluetooth device and pair it with
headphone again. Now both of your devices are
paired with headphone.
Double-press the Multi-function Button
to reject an incoming call.
Press the Multi-function Button to
play/pause music or answer/end call.
2
3-5S
English
English
5 6
ANC
Press the multi-function button three times to
turn on the low-latency game mode
3
Long press the plus and minus keys for
5 seconds to clear the pairing