User's Manual

Notices
Page 2
The antenna should not be co-located or operated in conjunction
with any other transmitting antenna.
The required antenna impedance is 50 ohms.
Warranty
This product is supplied with standard warranty as defined in
section 8.
Disposal of this product and packaging
Please dispose of the AIS transceiver in accordance with the
European WEEE Directive or with the applicable local regulations
for disposal of electrical equipment.
Every effort has been made to ensure the packaging for this product
is recyclable. Please dispose of the packaging in an
environmentally friendly manner.
Accuracy of this manual
The AIS transceiver may be upgraded from time to time and future
versions of the AIS transceiver may therefore not correspond
exactly with this manual. Information contained in this manual is
liable to change without notice. The manufacturer of this product
disclaims any liability for consequences arising from omissions or
inaccuracies in this manual and any other documentation provided
with this product.
Declaration of conformity
The manufacturer of this product declares that this product is in
compliance with the essential requirements and other provisions of
the R&TTE directive 1995/5/EC.
The product carries the CE mark, notified body number and alert
symbol as required by the R&TTE directive.
The product is intended for sale in the following member states:
Great Britain, France, Spain, Sweden, Austria, Netherlands,
Portugal, Denmark, Norway, Belguium, Italy, Finland, Ireland,
Luxembourg, Germany, Czech Republic.
FCC notice
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
!
Any attempt to tamper with or damage this product will
invalidate the warranty.
!
WARNING: It is a violation of the rules of the Federal
Communications Commission to input an MMSI that
has not been properly assigned to the end user, or to
otherwise input any inaccurate data in this device.