User's Manual

About your AIS class B transceiver
Page 6
Figure 2 shows the AIS transceiver mounting holes. Please refer to
section 3.2 for details of how to mount the AIS transceiver.
Figure 2 AIS transceiver overview
Electrical connections
The AIS transceiver has the following connections provided by the
attached cables:
• Power supply
• NMEA0183 data port for connection to chart plotters
• RS232 for connection to a PC
• External switch input
In addition there are two other connections for the GPS antenna
and the VHF antenna.
Figure 3 Electrical connections to the AIS transceiver
!
Do not attempt to adjust or remove the fixings next to
each of the four mounting holes. These fixings form
part of the sealing of the AIS transceiver and any
modification could affect the product's performance
and will invalidate the product's warranty.
Indicator lights
Switch
Mounting
holes
Mounting
holes
Blue Red Amber Green
Power and data cables
VHF antenna connector GPS antenna connector
Plotter
Power in
Switch RS232
Class B AIS transceiver