User's Guide

Operation

Page 24

3.15 Passwords and security

Certain important information stored within the transceiver can not be changed without knowledge of the

password. The protected information includes:

● MMSI number

● Name of vessel

● Call sign

● IMO number

● Channel management settings

● Vessel dimensions and GNSS antenna locations

● Type of ship

● Data interface configuration

When trying to edit any of the above information you will be prompted to enter the password.

The password entry screen is shown in Figure 21. Use the scroll wheel to select the required digit, then push

the scroll wheel to edit the value of that digit. Entered password digits are masked by asterisks, when complete

press the scroll wheel to enter the password.

Figure 21 Password entry screen

3.16 The configuration menu

The transceiver configuration menu can be accessed at any time by pressing the ‘Menu’ key. The menu is

navigated by rotating the scroll wheel to select a sub-menu or menu item, and pressing the scroll wheel to

select that sub-menu or menu item. Pressing the ‘Back’ key will go back to the previous menu level, or exit the

menu system if you are currently viewing the top level menu. Figure 23 shows the main menu screen.

You can return to the top level menu at any time by pressing the ‘Menu’ key, and exit the menu system at any

time by pressing and holding the ‘Back’ key for one second.

The main menu structure is shown in Figure 22. Some menu items are password protected and can only be

accessed using the password (see section 3.15).

Certain menu items are only available in Inland AIS mode. Please refer to section 3.17.

The default password is 00000000. The password may have been changed during installation.

For further information on changing the password refer to section .

10:05:21

ENTER PASSWORD:

0 . . . . . .

GPS

INT

Edit Screen