User's Guide

Operation
Page 26
Figure 23 Main menu screen
3.16.1 Voyage data menu
The voyage data menu provides quick access to the most commonly changed AIS transceiver parameters.
Figure 24 The voyage data menu
From this menu you can set the following parameters:
● Navigational status - select the most appropriate navigational status for your vessel from the list.
○ Under way using engine
○ At anchor
○ Not under command
○ Restricted manoeuvrability
○ Constrained by her draught
○ Moored
○ Aground
○ Engaged in fishing
○ Under way sailing
○ Not defined (default)
● Destination - enter the destination for the current voyage, 20 characters maximum.
● ETA - enter the estimated time and date of arrival at the destination. The date format is DD/MM and
the time format HH:MM using a 24 hour clock and UTC time.
● Draught - enter the maximum present static draught for your vessel in metres. The format for this
value is xx.x m (e.g., 02.5m). The maximum draught is 25.5m, you should enter this value if your
draught exceeds 25.5m.
● Cargo/ship type - see section 4.5.3.
● Number on board - number of crew on board, up to 8191 maximum.
13:20:47
MAIN MENU:
VOYAGE DATA
MESSAGES
USER SETTINGS
INSTALLATION
MAINTENANCE
OK
GPS
INT
Back Select
13:20:47
VOYAGE DATA:
Nav Status:
>>(15) not defined (default)
Destination:
>>Not Available
ETA: --:--:--
Draught: Not Available
OK
GPS
INT
Back