User's Manual
Table Of Contents
- 1 Notices
- 2 About your AIS class B transceiver
- 3 Installation
- 3.1 Preparing for Installation
- 3.2 Installation procedures
- Step 1 - Installing the Anti-Tamper Plate
- Step 2 - Installing the AIS transceiver
- Step 3 - Installing an optional external GPS antenna
- Step 4 - Connecting the VHF antenna
- Step 5 - Connecting the accessory cable
- Step 6 - Connecting an external switch
- Step 7 - Connecting to NMEA0183 compatible equipment
- Step 8 - Connection to an NMEA2000 network (optional)
- Step 9 - USB Connection (optional)
- Step 10 - Connecting to a power supply
- 4 Configuring your AIS transceiver
- 5 Operation
- 6 Anti-Tamper Configuration
- 7 Wi-Fi Configuration and Operation
- 8 Vessel Data Logger Configuration
- 9 Troubleshooting
- 10 Specifications
Thank you for buying this AIS Class B transceiver.
This product has been engineered to offer you the highest level of performance
and durability and we hope that it will provide many years of reliable service. We
constantly strive to achieve the highest possible quality standards, should you
encounter any problems with this product, please contact your dealer who will
be pleased to offer whatever assistance you require.