User's Manual
Table Of Contents
- 1 Notices
- 2 About your AIS class B transceiver
- 3 Installation
- 3.1 Preparing for Installation
- 3.2 Installation procedures
- Step 1 - Installing the Anti-Tamper Plate
- Step 2 - Installing the AIS transceiver
- Step 3 - Installing an optional external GPS antenna
- Step 4 - Connecting the VHF antenna
- Step 5 - Connecting the accessory cable
- Step 6 - Connecting an external switch
- Step 7 - Connecting to NMEA0183 compatible equipment
- Step 8 - Connection to an NMEA2000 network (optional)
- Step 9 - USB Connection (optional)
- Step 10 - Connecting to a power supply
- 4 Configuring your AIS transceiver
- 5 Operation
- 6 Anti-Tamper Configuration
- 7 Wi-Fi Configuration and Operation
- 8 Vessel Data Logger Configuration
- 9 Troubleshooting
- 10 Specifications
