User's Manual
Table Of Contents
- 1 Notices
- 2 About your AIS class B transceiver
- 3 Installation
- 3.1 Preparing for Installation
- 3.2 Installation procedures
- Step 1 - Installing the Anti-Tamper Plate
- Step 2 - Installing the AIS transceiver
- Step 3 - Installing an optional external GPS antenna
- Step 4 - Connecting the VHF antenna
- Step 5 - Connecting the accessory cable
- Step 6 - Connecting an external switch
- Step 7 - Connecting to NMEA0183 compatible equipment
- Step 8 - Connection to an NMEA2000 network (optional)
- Step 9 - USB Connection (optional)
- Step 10 - Connecting to a power supply
- 4 Configuring your AIS transceiver
- 5 Operation
- 6 Anti-Tamper Configuration
- 7 Wi-Fi Configuration and Operation
- 8 Vessel Data Logger Configuration
- 9 Troubleshooting
- 10 Specifications
Configuring your AIS transceiver
Page 26
For further assistance in configuring your AIS transceiver please refer to the Help menu within proAIS2.
Please ensure that you enter all vessel data accurately. Failure to do so could result in other vessels failing to
identify your vessel correctly. The vessel MMSI can only be programmed once using proAIS2, please take care to
program your MMSI correctly. If you need to change the MMSI for any reason, please contact your dealer who will
arrange to have the MMSI reset.
!