User's Manual

Installing and charging the AtoN Express
Page 9
3.4 Charging the AtoN Express
The AtoN Express is shipped with a partial charge and requires a full charge prior to installation on a structure to be marked (unless the
unit is powered via the Power box). The AtoN Express is charged by placing it in the configuration dock as shown in Figure 4.
During charging the status indicator will flash blue at a steady rate (1 second on - 5 seconds off). When charging is complete the status
indicator will flash a shorter blue flash (100 milliseconds on - 5 seconds off). Depending on the condition of the battery a full charge can
take up to 5 hours to complete.
Note that the AtoN Express can be configured as described in section 4 prior to charging.
Figure 4 Charging the AtoN Express
123 4
12
3
1
2
4
5
7
8
10
11
9
6