User's Manual

Using the AtoN Express
Page 18
5.2 Status indicator
While active in the fixing bracket
The status indicator shows the current operating state of the AtoN Express. The status indicator flashes green or yellow every 5
seconds. The number of flashes indicates the status conditions defined in the table below. The key status indications are also shown in
Figure 9
While in the configuration dock
The status indicator shows the current operating state of the AtoN Express. The status indicator flashes blue every 5 seconds. The
duration of the flashes indicates the charging status conditions defined in the table below.
.
Number of flashes Status
1 Green AtoN Express is active and operating normally.
2 Yellow Low battery warning (<50%), AtoN Express
continues to operate until battery is exhausted.
3 Yellow Error condition - please contact your dealer for
support.
5 Yellow Waiting for GPS fix or no GPS fix. If this condition
persists for more than 12 minutes, relocate the AtoN
Express to a location with a clear sky view.
6 Yellow Transmit time out - AtoN Express is unable to
transmit due to AIS network congestion.
7 Yellow No MMSI programmed. The AtoN Express is unable
to transmit because no MMSI has been configured.
1 Blue (1 second) Charging.
1 Blue (100 millisecond) Charged.
1 Blue (3 seconds) Charging error.