Programming Instructions

LD2342 V1.3 Page 10 of 21
SRT Marine
User guide
SRT-MTB
©
proAIS Application
•
When you have entered all of the vessel's data click the 'Save static data to AIS' button to programme this
configuration into the AIS transponder:
•
A warning will be displayed asking you to verify the MMSI number. Please check the number displayed is correct
before proceeding. If the number is incorrect click the 'No' button to cancel programming of the MMSI:
•
Click the 'Yes' button if the MMSI is correct. If you select 'No' the static data will not be updated and you can correct the
MMIS before proceeding.
•
The static data tab will be updated to show the newly programmed vessel information. The MMSI number will be
displayed with a grey background to indicate that it has been programmed and cannot be changed.