Data Sheet

Ecoﬂex

10 - ultraﬂexible and low loss

coaxial cable

Ecoﬂex

10 characteristics

Diameter .................................................... 10,2 mm

Impedance ....................................................... 50

Attenuation @ 1 GHz/100m ........................... 14,2 dB

fmax .............................................................. 6 GHz

Ecoﬂex 10 is a ﬂexible, low-loss coaxial cable speciﬁcally desig-

ned for use up to 6 GHz. Advanced manufacturing techniques

combined with the use of a low-loss PE-LLC Dielectric yields a

foaming rate of more than 70%. This results in very low attenu-

ation. Ecoﬂex 10 sets standards among ﬂexible coaxial cables.

The ﬂexibility of Ecoﬂex 10 is further enhanced through the

use of a stranded, oxygen-free copper center conductor. Use of

proprietary techniques, continuous center conductor calibrati-

on and compression as well as the application of a precoating

results in low losses and good impedance matching. Further ad-

vantages of the cable include the use of double shielding which

is constructed of overlapping copperfoil plus an additional tight

woven copper braid.

A screening efﬁciency of > 90 dB @ 1 GHz is realized. The cop-

perfoil has an applied PE-coating which prevents foil cracking

due to short radius bends. The black PVC sheath of Ecoﬂex 10

is UV-stabilized. In addition to a full compliment of standard

connectors, an easy to use solder free N-connector has been

specially developed for Ecoﬂex 10. Connector installation only

takes a few minutes and requires no special tools. Ecoﬂex 10

is the right choice when a low loss, highly ﬂexible microwave

rated cable is required.

Ecoﬂex 10 is available from stock in the following standard

drum sizes: 25 m, 50 m, 100 m, 200 m, 400 m and 500 m.

www.ssb-electronic.com

Grounding Clamp for Ecoﬂex

10, Part.-No. 6810

PAGE 1
Ecoflex ® 10 Ecoflex®10 - ultraflexible and low loss coaxial cable Ecoflex 10 is a flexible, low-loss coaxial cable specifically desig- Ecoflex®10 characteristics ned for use up to 6 GHz. Advanced manufacturing techniques Diameter ..................................................... 10,2 mm combined with the use of a low-loss PE-LLC Dielectric yields a Impedance ........................................................ 50 foaming rate of more than 70%.
PAGE 2
Ecoflex®10 Technical data Typ. attenuation (dB/100 m @ 20°C) Centre conductor.... stran. copper, oxygen free, 7 x 1,0 mm 5 MHz . ................ 0,8 1000 MHz ..............14,2 Centre conductor Ø . ........................................ 2,85 mm 10 MHz . ................ 1,2 1296 MHz ..............16,5 Dielectric . .................................. PE, low-loss Compound 50 MHz . ................ 2,8 1500 MHz ..............17,9 Dielectric Ø .....................................................