SSD High Ratio Transmission Conversion Instructions

SSD High Ratio Transmission Assembly Instructions

Note: The stock Wraith transmission needs to be removed from the chassis

as disassembled before starting.

1 Install bearings in the 34T steel idler gear

3 Install 36T steel gear on output shaft with 2mm pin

SSD-RC.com 1 Wraith High Ratio Transmission

PAGE 1
SSD High Ratio Transmission Assembly Instructions Note: The stock Wraith transmission needs to be removed from the chassis as disassembled before starting. 1 Install bearings in the 34T steel idler gear 2 3 Install 36T steel gear on output shaft with 2mm pin SSD-RC.
PAGE 2
4 Install bearings on 36T steel gear 5 6 SSD-RC.
PAGE 3
7 8 Now install the slipper clutch and spur gear the same way as on the stock Axial transmission. The stock Axial transmission gear cover can be installed using the screws provided. SSD-RC.