SSD Manual Locking Hub - Manual

7 Install flat head screws
The locking hub fits SLW hub compatible wheels. Be sure to
remove the normal hex hub from the wheels first.
8 Attach the wheel to the hub
SSD-RC.com 5 Manual Locking Hubs
M2.5 x 10mm
Flat head
M2.5 x 8mm
9 Locking and Unlocking
Using the supplied tool you can lock(anti-clockwise) or
unlock(clockwise) the wheel from the axle shaft.
Approximately 5 full turns are needed to fully engage/disengage.
SSD-RC.com 6 Manual Locking Hubs