Computer Accessories User Manual

Super Systems Inc. Page 28 SDS Data Logger Manual #4565 Rev D
To change any of these values, use the up or down arrow keys to highlight the field that is to be
changed, enter the new value, and press Enter. Valid values are:
Setpoint: -400 through 4000
TC Units: 0 for Fahrenheit and 1 for Celsius
TC Spool Correction: -100 through 100
For the Setpoint and the Spool Correction, the user can change the sign of the value by pressing the
circular arrow key. Pressing ESC will display the
Display Survey Information screen (menu option 2).
20. Set the Date and Time
This screen displays the date and time information for the instrument’s internal clock and calendar. Press
the up or down arrows to navigate to the part of the Date/Time that is going to be updated. Once the
desired part is highlighted, enter the new number and press Enter. Months are numbers 1 (January)
through 12 (December). Days are numbers 0 (Sunday) through 6 (Saturday). Hours are based on the
24-hour clock with numbers 0 (12 am) through 23 (11 pm). No changes will take place until the seconds
have been entered. For a detailed reference for all of the codes, see the
Date and Time Quick Reference
Chart
.