Data Sheet

d) Types 1, 2 and 3 can be sealed with washers and locknuts.
e) Type 6 should be sealed with Parker 3-905 type o-ring.
f) Type 7 should be sealed with PTFE tape.
g) When correctly sealed.
NOTES
OUTLINE DRAWING
All dimensions shown in mm. Tolerances = ±1mm.
HOUSING SPECIFICATIONS
ELECTRICAL INTERFACE
Wire Designation
Red Vs
Green Output
Blue 0V
Type 1
Type 2
Type 3
Type 5
Housing Series
Type 5 Type 6 Type 7
Thread M10x1 1/2”-20 UNF
e
1/4” NPT
f
Pressure
g
20 bar / 209
psi max.
7 bar / 101 psi maximum
Tightening
Torque
1.5 Nm / 13.26 in-lbs maximum
Housing Series
Type 1 Type 2 Type 3
Thread M12x1-8g
d
Pressure
g
7 bar / 101 psi maximum
Tightening
Torque
1.5 Nm / 13.26 in-lbs maximum
Type 7
Type 6