Installation Manual





Master Meter, Inc.  101 Regency Pkwy, Mansfield, TX 76063  T: 817-842-8000  F: 817-842-8100  MasterMeter.com

6. Installation Requirements

Step 1)

Remove the Meter Pit Lid

Step 2)

Remove threaded locking mechanism

Step 3)

Pass the cable through the Lid hole and install the Allegro Wall mount endpoint into the Pit lid. If

mounting brackets are available beneath the meter pit lid, the endpoint may alternatively be

installed in this manner.

Step 4)

Fasten the endpoint to the meter pit lid using the threaded locking mechanism

Step 5)

Attach the Allegro Wall mount endpoint to the encoded water meter using the appropriate Nicor

or Bare Wire connections

Step 6)

Activate the Allegro Wall mouont endpoint using a magnet or Allegro Activator tool

Step 7)

Verify Status using the LED Indicators located at the bottom of the endpoint’s neck