User's Manual

4
Standard Features
 Light sensor - Operates as a photocell with the integrated microcontroller and is used as a backup
light control in the event of microcontroller failure.
 Energy meter - Continuous measurement collection and aggregation with 1% accuracy.
 Integrated RF antenna.
 Over the air firmware updates.
 Each unit is configurable as a repeater, resulting in one additional ‘hop’ from the DCU.
 Real Time Clock.
 Network data is protected by AES 128 encryption and, optionally, AES 256.
 Relay Control for LED driver/ballast power.
 Alarms for power extremes and maximum temperature.
 “Auto Detection and Verification” Software
“Auto Detection and Verification” Software
The LCU NEMA includes the Telematics “Auto Detection and Verification” software that automatically
detects and stores the ballast type (1-10V or DALI) in the LCU. The ballast type is then retrieved during
the commissioning process, thereby eliminating the need to enter it manually into the CMS.
Optional Features
 Built-in GPS receiver for full auto-commissioning.
 Built-in NFC chip for data exchange with hand-held device.
LCU NEMA (Internal antenna) LCU NEMA (External antenna)