User's Manual

ST Engineering Telematics Wireless Ltd
18
A. Appendix - About GPS Coordinate Formats
Note: There are several different formats in which GPS coordinates are delivered. The only
format acceptable for import into CMS is ‘decimal degrees’. You can find conversion programs
on the Web to transform unacceptable formats into decimal degrees.
B. Appendix - Commissioning CVS File
Following is the full layout for the comma-separated value (CSV) file for import to CMS.
The file consists of at least two lines. The first line contains the following Keywords, each separated by a
comma. The second through ‘n’ lines contain the data corresponding to the keywords.
Line 1 = Keywords
Line 2 to n = Data
Description
Example
controller.host
Address.
10.20.0.29:8080
model
Model.
Xmllightpoint.v1:dimmer0
ballast.type
Ballast type: 1-10V or DALI
1-10V
dimmingGroupName
Name of group for dimming.
mazda_gr
macAddress *
ID or serial number from the LCU label.
6879
powerCorrection
Power correction.
20
install.date
Date of installation.
6/3/2016
power
Power that is consumed by device.
70
idnOnController
Unique identifier of the device on the DCU or
gateway
Light47
controllerStrId
Identifier of the DCU or gateway to which this
device is connected.
204
name *
Name of device as displayed to user. ID of
pole or other identification used for marking
Pole 21 (5858)
GPS Format Name and Format
Latitude Example
Acceptable for Input to CMS
DD Decimal degrees
DDD.DDDDD
33.47988
Yes
DDM Degrees and decimal minutes
DDD MM.MMM’
32 18.385’ N
No
DMS Degrees, minutes and seconds
DDD MM’ SS.S”
40 42’ 46.021” N
No