Operating Instructions

13
The baking trays provided are
removed and replaced similarly
to shelves. The tray is positioned
between the two wire guides
and slide all the way into the
oven cavity. The tray also has
two notches or bumps on the
side edges to prevent the tray
from accidentally being pulled
out too far. Orient the tray so
that the notches are closer to
the back of the oven.
Some models also have a wire roast rack which fits into the enamel tray. This allows food to rest
on the wire, and for cooking juices to collect in the tray below.
Insert the shelves into the shelf guides with the raised rear wire rail towards the back of the
oven as shown in the illustration.
The shelves slide neatly between the wire guide rails. The wire prong hooks underneath the
lower guide rail.
There is a bump underneath both sides of the shelves towards the back. This helps to prevent
the shelf from being accidentally pulled out too far. When replacing the shelves, you need
to ease the bumps over the guides.
Positioning The Shelves
Using The Oven
Baking Trays
prong goes
under shelf
guide rail
Wire Shelves
Telescopic Sliders
This range of St George ovens come fitted with telescopic
Sliders. The baking tray sits on the sliding arms, allowing
the tray to be pulled forward more easily.
When placing the tray on the slider arms, ensure the tray
sits securely between the vertical tabs.
oven_inb_care.indd 13 25/02/2008 15:22:25