Operating Instructions

24
Changing The Light Bulb
WARNING: Ensure that the appliance is switched off before replacing the light bulb to
avoid the possibility of electric shock.
Ensure the oven is cool. You may find it easier if you remove the shelves and trays before
beginning.
To remove the bulb:
Use a stiff spatula or knife to gently lift the glass cover out of the light socket. Be careful
not to damage the enamel surface.
Unscrew the light bulb (anticlockwise, looking up)
Replace with an identical new bulb. Replacement bulbs are available from St George
Appliances.
Push the glass cover back into place. The semi-circular cutout on the inside of the glass
cover goes toward the top.
1.
2.
3.
4.
Maintenance
Semi-circular
cutout
Cleaning The Roast Probe
The probe is manufactured from hygienic stainless steel. To maintain its quality finish, the probe
should be wiped with a warm damp cloth and mild detergent after each use.
The electrical components are enclosed in a special rubber casing. This casing is not
waterproof, so the roast probe should never be immersed in water.
oven_inb_care.indd 22 25/02/2008 15:23:15