User's Manual
Table Of Contents
- Prescription and Safety Information
- System Overview
- Product Description
- Directions for Use
- Checking the Status of the IPG Battery
- Technical Support
- Appendix A: Product Specifications
- Appendix B: System Components and Accessories
- Appendix C: Regulatory Statements
- Disposal Guidelines for Battery-Powered Devices
- Statement of FCC Compliance
- Statement of Compliance With License-Exempt RSS Standard (Canada)
- Identification Information for Product Registration
- Wireless Technology Information
- Radio Transmitter, Cables, Transducers
- Quality of Service for Wireless Technology
- Appendix D: Symbols and Definitions
- Appendix E: CE Mark Date
Connector strength
Exceeds EN 45502-1 requirements
Program storage capacity
16 programs with 1 stim set per lead
Upgradeable features
Yes
MRI status
MR Conditional
* Battery longevity was estimated using the following nominal settings for a dual-lead system 24
hours per day: 20-Hz frequency, 300 μs pulse width, and 800-μA amplitude at 1600-ohms
impedance. For information on how additional settings may impact the longevity of the device,
please contact Technical Support.
The IPG has the following operating parameters.
Table 4. Operating parameters for the IPG
Parameter
Range
Steps
Pulse width 40–1000 µs 10 µs (40–500 µs range)
50 µs (500–1000 µs range)
Frequency 2–80 Hz 2 Hz
Amplitude 0–6.0 mA 0.025–0.4 mA
NOTE:
The maximum current depends on the impedance, frequency, and pulse width settings.
Appendix B: System Components and Accessories
The Proclaim™ DRG neurostimulation system includes the following components.
NOTE:
Not all models are available in all countries. Contact your local representative for more
information.
IPGs
3664
Proclaim™ DRG IPG
IPG Accessories
1101 Torque wrench
7108 Port plug
Programmers and Controllers
3874
St. Jude Medical™ Clinician Programmer App
3875
St. Jude Medical™ Patient Controller App
Programmer and Controller Accessories
1210
Patient magnet
7884
DRG patient manual and magnet
13