Manualshelf

User Manual

ManualsBrandsST Microelectronics ManualsElectronicsBluetooth Low energy expansion board based on BlueNRG for STM32 Nucleo
12345678910
Ha
r
dwa
r
e desc
r
iption UM1765
The board also includes:
– a high frequency 16 MHz crystal
– a low frequency 32 kHz crystal for lowest power consumption
– a BALF-NRG-01D3 balun & harmonic filter
– an EEPROM M95640-RMN6P to store the board parameters
Not mounted:
– a JTAG connector to program the BlueNRG processor
– an SMA connector for the external antenna
2.1.1 Current measurements
To monitor the power consumption of entire BlueNRG X-NUCLEO-IDB04A1 board, jumper
U5 can be used, inserting an ammeter probe between pins 1 and 2 of the connector. Since
the power consumption of BlueNRG during most of its operating time is very low, an
accurate instrument in the range of few uA may be required.
6/15 DocID026346 Rev 4