User's Manual

BODYGUARDIAN CONTROL UNIT – BASE KIT Operator Manual
13
`
1.4 GRAPHIC SYMBOLS IN COMPLIANCE WITH THE IEC 60601-1
STANDARD
The following table shows description and localization of all graphic symbols in
compliance with the IEC 60601-1 safety standards present on the equipment
panels and/or on any other instruments or external devices to which the equipment
may be used in cojunction to or present in the same environment.
IEC 60601-1
SYMBOL
DESCRIPTION
POSITION
Alternating current
Symbol placed on the connection
points between the equipment and the
mains (alternating current source).
Direct current
Symbol placed on the connection
points to direct current source.
Equipotential terminal
Symbol placed on the outlet
connecting the equipment to the
equipotential node of the building, if
any.
Protective earth (ground)
Symbol placed on the connection
points between the equipment and the
protective grounding.
High voltage
Symbol placed on circuits or
equipment parts with high voltage.
Attention! Refer to the
attached instructions.
Symbol placed on items for which it is
important to read the Operator
Manual for relevant information (see
ATTENTION paragraph).
Device with CF-type applied
parts
Symbol placed on applied parts to
the patient with a CF-protection level.
Device with BF-type applied
parts
Symbol placed on applied parts to
the patient with a BF-protection level.
Device with B-type applied
parts
Symbol placed on applied parts to the
patient with a B-protection level.