User's Manual

BODYGUARDIAN CONTROL UNIT – BASE KIT Operator Manual
34
2.2 BODYGUARDIAN CONTROL UNIT DESCRIPTION
The following figures (2-2 and 2-3) show the Bodyguardian Control Unit:
Figure 2.2 – Bodyguardian Control Unit: front view
Figure 2.3 - Bodyguardian Control Unit: back view
In the previous figures the following components can be found:
1. Signaling Leds
2. Push button
3. Charger connectors (n° 2 contacts)
4. Patient connectors (n° 4 snap contacts to connect to Disposable adhesive
electrodes patch) with the following configuration reading in clockwise sense
from the Top-Left angle: INJ2, INJ1, SENSE1, SENSE2. The connection of
the device to the disposable adhesive patch is possible, due to mechanical
constraints, only in one correct way.
1
3
4
2
INJ2
INJ1
SENSE1
SENSE2