User's Manual

BODYGUARDIAN CONTROL UNIT – BASE KIT Operator Manual
36
2.2.2 BLUETOOTH CONNECTION
The Bodyguardian Control Unit is equipped with an integrated Bluetooth network
interface (for Protocol Specification please refer to the document
BGP110006_Commend_Interface_Specifciations) that allows to establish a
pairing connection with an external Associated Device (e.g. Android smartphone
or other).
The Bluetooth interface can be used to configure the Bodyguardian Control Unit
and to transmit the data registered and stored on the Bodyguardian Control Unit to
the Associated Device.
The communication between Bodyguardian Control Unit and the external
Associated Device is handled via software.
2.2.3 SIGNALING LEDS
The following figure shows the signalling Leds placed on the front cover of the
Bodyguardian Control Unit.
Figure 2-9 – Signaling Leds
The 3 Monocolor Leds indicate device status and conditions.
The Leds indicates the following conditions:
LED 1 – Yellow: indicates the Device Charging Status;
LED 2 – Green: indicates the Device Operative Mode Status;
LED 3 – Yellow: indicates special Events occurrences.
The following table summarizes the possible Leds configuration status and
relative significance:
Signalling
LEDS