User's Manual

BODYGUARDIAN CONTROL UNIT – BASE KIT Operator Manual
45
`
Prepare the skin area by cleaning with soap and water.
If hair is present, shave the area.
Make sure application area is dry with no lotion or cream applied.
4.1.3 PLACING THE DISPOSABLE ADHESIVE ELECTRODES PATCH
Follow the following instructions in order to correctly place the Bodyguardian
Control Unit.
1. Before removing the Bodyguardian Control Unit from its charging station,
ensure that the control unit is fully charged; the light LED 1 ( ) should
be OFF indicating a full charge.
2. Attach the Bodyguardian Control Unit to the four snaps on the Electrodes
Patch. Make sure all four snaps are connected; see Error! Reference
source not found.2.
Figure 4-2 Connecting Bodyguardian Control Unit to Electrodes Patch
3. Peel plastic off the back of the Electrodes Patch.
4. Ensure that the arrow on the Electrodes Patch points towards your left arm if
the patch is placed vertically (Error! Reference source not found.) or up
towards your head if placed horizontally (Error! Reference source not
found.).
5. Apply adhesive side of the Disposable adhesive electrodes patch to the skin
on the established placement (§ 4.1.1), and gently press.
NOTE
The Disposable adhesive electrodes patch should be comfortable when properly
positioned on the chest.