User's Manual

User Manual
6/17 DocID-xx
• Automatic meter reading
• Home and building automation
• WSN
• Industrial monitoring and control
• Wireless fire and security alarm systems
2.2 Hardware and software requirements
To use STM32 Nucleo development boards with the X-NUCLEO-S2915A1
expansion board, connect the boards as shown below.
Figure 2. X-NUCLEO-S2915A1 expansion board connected to an STM32 Nucleo development board
The interconnection between the STM32 Nucleo and the X-NUCLEO-
S2915A1 has been designed to allow using any STM32 Nucleo board,
although complete testing has been performed using NUCLEO-L053R8,
NUCLEOF401RE and NUCLEO-L152RE boards hosting the ultra-low
power STM32.
The following software and hardware specifications are required:
• a PC/laptop with Microsoft Windows (7 and above) to install the
software package (X-CUBE-SUBG1)