User's Manual

SPSGRFC
P a g e | 34 Rev 0.1
10 Reflow soldering
The SPSGRFC is a surface mount Sub1GHz Transceiver module supplied on a 11 pin, 4-layer
PCB. The final assembly recommended reflow profiles are indicated here below.
Soldering phase has to be executed with care: In order to avoid undesired melting phenomenon,
particular attention has to be taken on the set up of the peak temperature.
Here following some suggestions for the temperature profile based on IPC/JEDEC J-STD-020C,
July 2004 recommendations.
Table 4 – Soldering
Figure 6 – Soldering profiles