User's Manual
Table Of Contents
September 2007 Rev 1 1/14
14
SPZB260
ZigBee module
Features
■ Integrated 2.4GHz ,IEEE 802,15,4-compliant
transceiver:
– 0 dBm nominal TX output power
– -92 dBm RX sensitivity
– + 2 dBm in boost mode
– RX filtering for co-existence with IEEE
802.11g and Bluetooth devices
– Integrated VCO and loop filter
■ Integrated IEEE 802.15.4 PHY and MAC
■ Controlled by a Standard Serial Line for an
easy interface of host microcontrollers (SPI)
■ Embedded flash and integrated RAM for
program and data storage
■ On board 24 MHz stable Xtal
■ Integrated RC oscillator ( typ 10KHz) for low
power operation
■ 1 µA power consumption in Deep sleep mode
■ Watchdog timer and power on reset
■ Pins available for Non-intrusive debug
interface (SIF)
■ Single supply voltage 2.1 to 3.6 Vdc.
■ Available Link and Activity outputs for external
■ Indication / monitor
■ CE compliant
■ FCC compliant ( FCC ID:S9NZB260A )
Applications
■ Industrial controls
■ Sensor networking
■ Monitoring of remote systems
■ Home applications
■ Security systems
■ Lighting controls
Description
SPZB260 is a low power consumption ZigBee
module optimized for embedded applications. It
enables OEMs to easily add wireless capability to
electronic devices.
The module is based on SN260 ZigBee Network
Processor which integrates a 2.4GHz, IEEE
802.15.4-compliant transceiver as well as IEEE
802.15.4 PHY and MAC.
24 MHz high stability Xtal is available aboard the
module to perform the timing requirements as per
ZigBee specifications.
A single supply voltage is requested to power the
module. An integrated 2.5 GHz specific Murata
antenna is aboard. The voltage supply also
determines the I/O ports level allowing an easy
interface with the host system.
The module is controlled by means of a standard
serial interface (SPI) allowing the connections to a
variety of Host microcontrollers.
( for other information and details, please refer to
SN260 Datasheet available at www.st.com )
www.st.com