User's Manual

Electrical characteristics SPZB260
6/14
4 Electrical characteristics
4.1 DC electrical characteristics
4.2 DC I/O specification
Table 4. DC electrical characteristics
Symbol Parameter Conditions
Values
Unit
Min Typ Max
IRX RX current ( boost mode) Vdd = 3.0 V, T = 25 °C 38 mA
IRX RX current ( normal mode) Vdd = 3.0 V, T = 25 °C 36 mA
ITX TX current ( boost mode) Vdd = 3.0 V, T = 25 °C 42 mA
ITX TX current (normal mode) Vdd = 3.0 V, T = 25 °C 36 mA
IDS Deep sleep current
2.1 < Vdd < 3.6 V
T = 25°C
1 µA
Table 5. DC Input / Output specification
Symbol Parameter Conditions
Values
Unit
Min Typ Max
VIL Low Level Input Voltage 2.1 < Vdd < 3.6 V 0 0.2 x Vdd V
VIH High level input voltage 2.1 < Vdd < 3.6 V 0.8 x Vdd Vdd V
Iil Input current for logic 0 2.1 < Vdd < 3.6 V -0.5 mA
Iih Input current for logic 1 2.1 < Vdd < 3.6 V 0.5 mA
Ripu Input pull-up resistor 30 kΩ
Ripd Input pull-down resistor 30 kΩ
VOL Low level output voltage 0 0.18 x Vdd V
VOH High level output voltage 0.82 x Vdd Vdd V
IOHS Output source current 4 mA
IOLS Output sink current 4 mA
IOHH Output source current (pin 15,16,17) 8 mA
IOLH Output sink current (pin 15,16,17) 8 mA
IOTot Total output current for I/O 40 mA