Datasheet

ManualsBrandsST ManualsDiscrete SemiconductorsPower Transistor, SOT-89, NPN, 60V

Table Of Contents

This is information on a product in full production.

August 2012 Doc ID 11783 Rev 3 1/16

2STD1360, 2STF1360, 2STN1360

Low voltage fast-switching NPN power transistors

Datasheet − production data

Features

■ Very low collector-emitter saturation voltage

■ High current gain characteristic

■ Fast-switching speed

Applications

■ Emergency lighting

■ LED

■ Voltage regulation

■ Relay drive

Description

This device is an NPN transistor manufactured

using new low voltage planar technology with

double metal process. The result is a transistor

which boasts exceptionally high gain performance

coupled with very low saturation voltage.

The complementary PNP types are the

2STD2360T4, the 2STF2360 and the 2STN2360.

Figure 1. Internal schematic diagram

TO-252 (DPAK)

SOT-223 SOT-89

TAB

Table 1. Device summary

Order codes Marking Packages Packaging

2STD1360T4 2STD1360 DPAK Tape and reel

2STF1360 1360 SOT-89 Tape and reel

2STN1360 N1360 SOT-223 Tape and reel

www.st.com

Summary of content (16 pages)

PAGE 1
2STD1360, 2STF1360, 2STN1360 Low voltage fast-switching NPN power transistors Datasheet − production data Features ■ Very low collector-emitter saturation voltage ■ High current gain characteristic ■ 4 4 Fast-switching speed 1 Emergency lighting ■ LED ■ Voltage regulation ■ Relay drive 3 3 2 1 SOT-223 Applications ■ 2 SOT-89 TAB 3 1 TO-252 (DPAK) Description Figure 1.
PAGE 2
Absolute maximum ratings 1 2STD1360, 2STF1360, 2STN1360 Absolute maximum ratings Table 2. Absolute maximum ratings Value Symbol Parameter 2STD1360 2STF1360 2STN1360 DPAK SOT-223 VCBO Collector-base voltage (IE = 0) 80 V VCEO Collector-emitter voltage (IB = 0) 60 V VEBO Emitter-base voltage 6 V Collector current 3 A Collector peak current (tP < 5 ms) 5 A Base current 0.2 A Base peak current (tP < 5 ms) 0.
PAGE 3
2STD1360, 2STF1360, 2STN1360 2 Electrical characteristics Electrical characteristics TCASE = 25°C; unless otherwise specified. Table 4. Symbol Electrical characteristics Parameter Test conditions Min. Typ. Max.
PAGE 4
Electrical characteristics 2STD1360, 2STF1360, 2STN1360 2.1 Typical characteristics (curves) Figure 2. DC current gain (VCE = 5 V) Figure 4. Collector emitter saturation voltage Figure 5. Base emitter saturation voltage Figure 6. Resistive load switching on Resistive load switching off 4/16 Figure 3. Figure 7.
PAGE 5
2STD1360, 2STF1360, 2STN1360 Figure 8. Electrical characteristics Capacitance C1000 (pF) CEB f = 1 MHz 100 CCB 10 0.1 2.2 1 10 VR100 (V) Test circuits Figure 9. Resistive load switching 1. Fast electronic switch 2.
PAGE 6
Package mechanical data 3 2STD1360, 2STF1360, 2STN1360 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.
PAGE 7
2STD1360, 2STF1360, 2STN1360 Table 5. Package mechanical data DPAK (TO-252) mechanical data mm Dim. Min. Typ. Max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 E 5.10 6.40 6.60 E1 4.70 e 2.28 e1 4.40 4.60 H 9.35 10.10 L 1 L1 2.80 L2 0.80 L4 0.60 1 R V2 0.
PAGE 8
Package mechanical data 2STD1360, 2STF1360, 2STN1360 Figure 10. DPAK (TO-252) drawing 0068772_I Figure 11. DPAK footprint(a) 6.7 1.8 3 1.6 2.3 6.7 2.3 1.6 a.
PAGE 9
2STD1360, 2STF1360, 2STN1360 Table 6. Package mechanical data DPAK (TO-252) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 Doc ID 11783 Rev 3 18.4 22.
PAGE 10
Package mechanical data 2STD1360, 2STF1360, 2STN1360 Figure 12. Tape for DPAK (TO-252) 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F B1 W K0 B0 For machine ref. only including draft and radii concentric around B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v1 Figure 13. Reel for DPAK (TO-252) T REEL DIMENSIONS 40mm min. Access hole At sl ot location B D C N A Full radius Tape slot in core for tape start 25 mm min.
PAGE 11
2STD1360, 2STF1360, 2STN1360 Table 7. Package mechanical data SOT-89 mechanical data mm Dim. Min. Typ. Max. A 1.40 1.60 B 0.44 0.56 B1 0.36 0.48 C 0.35 0.44 C1 0.35 0.44 D 4.40 4.60 D1 1.62 1.83 D3 0.90 E 2.29 2.60 e 1.42 1.57 e1 2.92 3.07 H 3.94 4.25 H1 2.70 3.10 K 1° 8° L 0.89 1.20 R 0.
PAGE 12
Package mechanical data 2STD1360, 2STF1360, 2STN1360 Figure 14.
PAGE 13
2STD1360, 2STF1360, 2STN1360 Package mechanical data Figure 15.
PAGE 14
Package mechanical data Table 8. 2STD1360, 2STF1360, 2STN1360 SOT-223 mechanical data mm Dim. Min. Typ. A Max. 1.80 A1 0.02 0.1 B 0.60 0.70 0.85 B1 2.90 3.00 3.15 c 0.24 0.26 0.35 D 6.30 6.50 6.70 e 2.30 e1 4.60 E 3.30 3.50 3.70 H 6.70 7.00 7.30 V 10° Figure 16.
PAGE 15
2STD1360, 2STF1360, 2STN1360 4 Revision history Revision history Table 9.
PAGE 16
2STD1360, 2STF1360, 2STN1360 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.